Showing results 201 - 300 of 349
This summary from a Better Buildings Residential Network peer exchange call focused on the benefits and challenges of program automation.
This presentation answers the questions of why and how to quantify the air quality impacts of energy efficiency policies and programs.
The purpose of this position paper is to introduce a new framework efficiency screening designed to address know problems with cost-effectiveness tests.
This presentation includes a brief Introduction to Northeast Energy Efficiency Partnerships (NEEP) and the Regional Evaluation, Measurement and Verification Forum (EM&V Forum), Regional Energy Efficiency Database (REED) development and content, and how to access the REED reports and underlying data.
This interim evaluation report examines the design, delivery, and market effects of each of the Southeast Energy Efficiency Alliance's (SEEA) thirteen sub-grantee programs and identifies opportunities to increase each program's success, and quantifies and verifies the energy savings achieved through the programs' funded home energy improvements and the cost-effectiveness of those savings.
The Small Town Energy Program (STEP) toolkit gives a complete overview of STEP from planning to implementation. It also includes access to a wide variety of materials developed by the program, including: local asset materials, partner materials, personnel materials, program administrative materials, outreach materials, and surveys. STEP has posted these toolkit documents with the hope that it will assist other small towns and communities in building and running more energy efficiency programs.
Sources of Energy Efficiency Program Savings for Air Regulators
This presentation cover how and where air quality regulators and others can find information to support the use of energy efficiency to achieve emissions reductions and other co-benefits. Resources covered include a report by the Regulatory Assistance Project (RAP) on energy efficiency data sources for air regulators and the Regional Energy Efficiency Database (REED).
State, Regional and National Energy Efficiency Forecasting
This webcast provides approaches for projecting, analyzing and representing end-use energy efficiency potential and its impacts on state, regional and national energy use.
STEP was developed with a mission to "create a model community energy transformation program that serves as a roadmap for other small towns across the U.S." This final technical report summarizes the program's comprehensive energy evaluations for homes.
The State and Local Energy Efficiency Action Network (SEE Action) Evaluation, Measurement, and Verification (EM&V) Resource Portal serves as an EM&V resource one-stop shop for energy efficiency program administrators and project managers. The resources focus on tools and approaches that can be applied nationwide, address EM&V consistency, and are recognized by the industry.
The Uniform Methods Project: Methods for Determining Energy Efficiency Savings for Specific Measures
This report provides a set of model protocols for determining energy and demand savings that result from specific energy efficiency measures or programs. The methods described are among the most commonly used approaches in the energy efficiency industry for certain measures or programs; they draw from the existing body of research and best practices for energy efficiency evaluation, measurement, and verification (EM&V).
This peer exchange call summary focused on the challenges, advantages and disadvantages of using a home scoring system.
The ultimate objective of the protocol is to develop a system that can be used to guide the production of readily usable dataset that can leverage project data from future meter-based measurement and evaluation studies, or metering studies to develop end-use load shapes. The protocol includes a "NEEP Residential Data Collection Protocol Report" template.
This report contains guidance on issues and policy options related to providing access to customer energy use information that can be used to support and enhance the provision of energy efficiency services while protecting customer privacy.
In this video interview segment, Marty Treadway of Energy Smart Colorado discusses how to avoid contractor frustration by testing data collection tools before deployment.
This document provides sample policy language based on a synthesis of existing state and local policies, and discussion on key provisions, for the design of a commercial benchmarking and disclosure policy.
This report provides a comprehensive review of a wide range of problems and inconsistencies in current cost-effectiveness test practices, and recommends a range of best practices to address them.
This peer exchange call summary focused on how to calculate and communicate program activities and results.
A tool that estimates the air quality, human health, and related economic co-benefits (such as energy efficiency) of initiatives that reduce air emissions.
Form used by the Colorado Public Utilities Commission for consent to disclose utility customer data.
Presentation describing how Conservation Services Group uses data to monitor market transformation and for internal QA/QC purposes.
In this video interview segment, Tom Bregman of Energize New York, Energy Smart discusses how to overcoming Difficulties Collecting Non-Utility Fuel Data (e.g., fuel oil, propane).
This report provides results, lessons learned and recommendations for driving energy efficiency in existing building on an urban scale based on the second year of the Energize Phoenix energy efficiency program.
This report provides information on how access to energy use data can help local governments create policies for benchmarking and disclosing building energy performance for public and private sector buildings.
This report provides information on how supporting access to building benchmarking data can help utilities increase efficiency and drive down energy demand.
This report provides information on how energy use data access can help state governments lead by example through benchmarking and disclosing results and implement benchmarking policies for the private sector.
This report is intended to serve as a guide for policymakers and multifamily stakeholders on benchmarking and disclosure rules and regulations. It provides an introduction to the multifamily housing sector, followed by a thorough review of existing benchmarking and disclosure policies and an assessment of continuing policy challenges and opportunities.
This progress report provides community members and others interested in EnergySmart with a clear snapshot of its progress. The report also provides a timeline of energy efficiency policies and programs in Boulder County.
A tool that provides information on the air emissions attributable to the electricity used in a home or business during one year, along with a description of what these numbers mean in everyday terms and information on how to be more energy efficient or buy green power.
NeighborWorks of Western Vermont (NWWVT) contracted with The Cadmus Group, Inc., to evaluate its H.E.A.T. Squad program. The evaluation activities informed two main areas of interest: program and market effects, and impact and cost-effectiveness. To inform the evaluation, Cadmus surveyed participant and non-participant homeowners and interviewed program stakeholders.
This report provides guidance and recommendations to help residential energy efficiency programs to more accurately estimate energy savings. It identifies steps program managers can take to ensure precise savings estimates, apply impact estimates over time, and account for and avoid potential double counting of savings.
This peer exchange call summary focused on receiving and tracking data for evaluation.
This paper explores ways in which program administrators are using social norms to spur behavior change and, as a result, curb energy use. In recent years, home energy reports (HER) programs have applied the concept of social norms to the energy efficiency context. These feedback programs inform customers of how their energy consumption compares to their neighbors' and provide other information about their usage, with the goal of enticing customers to change their energy use behavior to improve their relative neighborhood ranking.
This peer exchange call summary focused on how to receive and evaluate feedback from customers and contractors.
This peer exchange call summary focused on multifamily information technology tools for project information, marketing, assessment, tracking and evaluation.
This report presents key findings and recommendations from the process evaluation of Clean Energy Works Oregon's (now Enhabit's) energy efficiency financing program. Table 1 provides a good list of key process evaluation research questions which may help others scope comprehensive process evaluations.
This paper describes the problems and issues that arise for energy efficiency programs as a result of common cost-effectiveness test implementation practice. It also provides recommendations for how to address these challenges.
Pacific Power contracted with The Cadmus Group, Inc., to conduct impact and process evaluations of its Washington low-income weatherization program for the program period extending from March 2009 through February 2011. The impact evaluation assessed energy savings and cost-effectiveness associated with the program, and in doing so quantified select non-energy benefits. The process evaluation assessed program delivery and efficacy, potential bottlenecks, opportunities for improvements, and participants’ experiences and satisfaction with the program.
Homeowner survey created by the utility to inform their whole home upgrade program.
This report presents the preliminary process and market evaluation of the Better Buildings Neighborhood Program. As part of the evaluation, the report identifies the factors most strongly correlated with the 10 most successful grantees' performance and offers recommendations to the Energy Department and grant recipients for the final program year.
This report presents the preliminary process and market evaluation of the Better Buildings Neighborhood Program. As part of the evaluation, the report identifies the factors most strongly correlated with the 10 most successful grantees' performance and offers recommendations to the Energy Department and grant recipients for the final program year.
This peer exchange call summary focused on effective program evaluation and incorporating changes into programs based off evaluation insight.
This peer exchange call summary focused on planning and conducting evaluations.
Homeowner data collection survey created by RePower.
This report describes how customer usage data can help promote the adoption of retro-commissioning polices for public and private commercial buildings.
Evaluation reports from the Seattle Community Power Works program. The city of Seattle worked to encourage efficiency upgrades for single-family and multi-family residences, small businesses, hospitals, and large commercial and municipal buildings.
This mid-program evaluation includes extensive analysis of program sectors, including results of surveys of participants, and summarizes lessons learned to date.
This mid-program evaluation includes extensive analysis of program sectors, including results of surveys of participants, and summarizes lessons learned to date.
This peer exchange call summary focused on strategies and challenges of getting household energy data.
EnergySmart Colorado uses surveys and a customer database to get feedback from homeowners that helps fine-tune program services and operations.
This report provides policymakers with principles and recommendations to understand and manage concerns about bill and rate impacts resulting from requiring utilities to provide efficiency programs.
This resource is intended to help state energy, environmental, and policy makers identify and quantify the many benefits of clean energy to support the development and implementation of cost-effective clean energy initiatives. It also identified the multiple benefits of clean energy and explains why they should be quantified and considered along with costs.
This data intake template spreadsheet provides a way to track home energy performance metrics.
This template, used by Clean Energy Works Oregon (now Enhabit), standardizes a number of forms that contractors fill out for the program.
Survey for Minnesota home owners participating in Community Energy Services pilot program about their experience at their home visit.
This presentation shares how the Neighbor to Neighbor Energy Challenge collected and evaluated data and used the results to improve its program.
Authorization form to obtain household energy information.
Authorization form to obtain household energy information.
This peer exchange call summary focused on how to gather data for evaluation and reporting.
This peer exchange call summary focused on aggregating, reporting and evaluating information.
Developing an Evaluation Measurement and Verification Plan for Your Energy Efficiency Project/Program
This webcast discussed developing an Evaluation Measurement and Verification Plan for energy efficiency programs, including the collection of data and analysis of program performance.
Developing an Evaluation, Measurement and Verification Plan For Residential Retrofit Programs
This report provides results, lessons learned and recommendations for driving energy efficiency in existing building on an urban scale based on the first year of the Energize Phoenix energy efficiency program.
Sample phone survey template for program contractors.
This sample phone survey template for program drop-outs, created by the Better Buildings Neighborhood Program, was designed for programs to find out why applicants that applied to participate in a program ultimately dropped out.
This sample phone survey template, created by the Better Buildings Neighborhood Program, was designed for programs to use with applicants who have been screened out from participating in a program.
This sample email survey template, created by the Better Buildings Neighborhood Program, was designed for programs to develop their own survey of successful program participants in order to assess customer experience.
Survey for consultants participating in Green Madison and Me2 programs about their experiences with the programs.
Survey for consultants participating in Green Madison and Me2 programs about their experiences with the programs.
Questionnaire for contractors participating in the Green Madison program about their overall experience, level of participation, training, and available resources.
This presentation introduces new users to ENERGY STAR Portfolio Manager and how to get started with benchmarking.
Sample Request for Proposals (RFP) was issued by Lawrence Berkley National Laboratory for a process and impact evaluation for the U.S. Department of Energy's Better Buildings Neighborhood Program.