This report presents the impact evaluation results of the Marin Clean Energy (MCE) Home Utility Reports (HUR) program for 2015.
Showing results 1 - 100 of 119
This report includes a billing analysis, process evaluation, and baseline study for the Connecticut Residential New Construction (RNC) program. It also includes the results of the process evaluation.
This report provides an annual savings claim summary and includes case studies and customer testimonials from homeowners, towns, and businesses that Efficiency Vermont served in 2016.
This report is an update of findings from three prior evaluations of Eversource's Home Energy Reports (HERs) Pilot Program. The HERs pilot program began in January 2011. The pilot program randomly selected residential customers to whom it sent reports rating their energy use, comparing it to that of their neighbors, and suggested ways for the households to save energy.
This study identifies actionable strategies and innovations to improve the multifamily program performance, realization rates, and overall program cost-effectiveness for both the residential and commercial sectors.
This report reviews Ouachita Electric Cooperative's transition to its HELP PAYS® tariffed on-bill investment program. This analysis uses data for the first nine months of the program launched in 2016. Some of those benefits are being validated immediately by the market response in the service area compared to the same period of the prior year with HELP, the on-bill financing program that HELP PAYS replaced.
This report for the Connecticut Energy Efficiency Board provides a review of best practices in impact evaluation, recommendations for calculating oil and propane savings, and discusses the impact evaluation findings for the Home Energy Services (HES) and Home Energy Services-Income Eligible (HES-IE) Programs. This best practices review provides an overview of key evaluation protocol and guideline documents.
This Technical Reference Manual (TRM) defines the consensus calculations of the electric and natural gas energy savings and the electric demand reductions, achieved from installing energy efficiency and renewable energy measures that are supported by Focus on Energy programs.
An Introduction to Measuring Energy Savings
This webinar covers evaluation, measurement and verification (EM&V) for energy efficiency programs and projects. In addition, it covers key areas such as savings estimates and how energy savings are measured.
This report presents the results of the first‐year process and impact evaluation of Berkshire Gas' Home Energy Report (HER) program. The primary objective of the program is to provide residential households with information on their gas consumption and tips on how to save energy to prompt them to take action to reduce their natural gas usage.
This report identifies opportunities for Connecticut's Home Energy Solutions program (HES) to increase savings related to air sealing, duct sealing, and insulation.
This report is the process evaluation of the Connecticut Multifamily (MF) Initiative, which leveraged the state's Home Energy Solutions (HES) and Home Energy Solutions-Income Eligible (HES-IE) programs. The objective of this process evaluation is to provide actionable recommendations about how to improve the design, delivery, and administration of the MF Initiative.
The COOL SMART impact evaluation team conducted an in situ study of ductless mini‐split heat pumps (DMSHPs) in Massachusetts and Rhode Island. This report presents the consumption and savings analysis of the DMSHP study.
This report presents the results from a comprehensive impact and process evaluation of Efficiency Maine's Low-Income Multifamily Weatherization Program.
This report presents the process evaluation results on the statewide Home Upgrade Program and includes findings on program operations, participant engagement, non-energy impacts, contractor characteristics, and contractor-customer interactions.
This report presents findings of a process evaluation of Cape Light Compact's Creating Awareness for Power Efficiency Initiative, which included in-depth interviews with 27 customers of varying participation levels. It also includes the results of an impact evaluation using econometric analysis to estimate savings.
Evaluation of Residential Behavior-Based Programs
Residential behavior-based (BB) programs use strategies grounded in the behavioral and social sciences to influence household energy use. These programs have unique evaluation challenges and usually require different evaluation methods than those currently employed for most other types of efficiency programs. This webcast provides an introduction to documenting the energy savings associated with BB programs and examples of how different jurisdictions are addressing BB program evaluation.
This report includes evaluation analysis and findings from the Eversource New Hampshire Home Energy Report pilot program.
This report presents the results of the evaluation of National Grid Rhode Island's 2014 EnergyWise program. EnergyWise is designed to achieve energy savings in single family (1-4 unit) residential homes by directly installing efficient lightbulbs and water heating measures, providing devices for homeowner use, and offering building shell retrofit rebates.
Lessons Learned and the Better Buildings Residential Program Solution Center
Take you on a tour of the U.S. Department of Energy’s Better Buildings Residential Program Solution Center content and functionality and explore how you can use the Solution Center to help design, implement, and evaluate residential energy efficiency programs. Program examples focus on contractor engagement and workforce development. Learn how to support and partner with the workforce who will deliver your program’s energy efficiency services by understanding their capacity, recruiting contractor partners, enabling technical training and business development support, and refining program processes over time.
This report provides the electric and natural gas impacts from the suite of National Grid Multifamily Retrofit Programs as determined through a billing analysis.
This report for the Connecticut Energy Efficiency Board documents the difficulties that evaluators and programs in Connecticut faced in conducting evaluation studies and makes recommendations for improving data quality and consistency.
Presentation on the Energy Efficiency Reporting Tool for Public Power Utilities
This presentation discusses the energy efficiency reporting tool for public power utilities. The tool is an Excel-based template is designed to produce consistent, useful metrics on program investments and performance for small to medium-sized administrators of public power efficiency programs.
This presentation discusses process management improvements that Arizona Public Service made to streamline their program and advance home energy upgrades.
This presentation discusses how Energy Upgrade California streamlined its program through improvements in its HPXML and IT software.
Setting Baselines for Planning and Evaluation of Efficiency Programs
The key challenge with quantifying savings from end-use efficiency activities is the identification of an accurate baseline from which to determine the savings. Regardless of the protocol or procedure applied, all savings values are determined by estimating likely energy use in the absence of the program or project (the “counterfactual” scenario, or baseline). This webcast provides an introduction to considerations and common practices for defining baselines, the relationship between baselines and savings attribution, and examples of how different jurisdictions are addressing market baseline studies, setting baselines for retrofit measures, and market transformation program baselines.
This report summarizes the impact analyses of National Grid's and Eversource Energy's Home Energy Report (HER) programs. The evaluation team conducted three distinct impact analyses related to these HER programs: Cohort-Specific Impact Analysis; Mapping Analysis; and Dual Treatment Analysis.
Using Deemed Savings and Technical Reference Manuals for Efficiency Programs and Projects
Applying well documented stipulated (deemed) values is a common practice for determining the savings from energy efficiency projects and programs and the databases where such deemed values are cataloged are called Technical Reference Manuals (TRMs). This webcast introduces the use of deemed savings, information on setting up and updating TRMs, lessons learned, and resources for state officials. As examples, speakers discuss the content and development processes used for the Northwest regional TRM and the Iowa state TRM.
This handout summarizes the key lessons learned regarding financing contained in the Better Buildings Residential Program Solution Center.
This handout summarizes the key lessons learned regarding marketing and outreach contained in the Better Buildings Residential Program Solution Center.
This handout summarizes the key lessons learned regarding program design contained in the Better Buildings Residential Program Solution Center.
Volume 1 of the Better Buildings Neighborhood Program Evaluation Report provides findings from a comprehensive impact, process, and market effects evaluation of the program period, spanning from September 2010 through August 2013.
Volume 2 of the Better Buildings Neighborhood Program Evaluation Report comprises a measurement and verification process, as well as billing regression analysis on projects with sufficient utility bill data, to determine gross verified savings.
Volume 3 of the Better Buildings Neighborhood Program Evaluation Report statistically identifies factors associated with successful residential energy upgrade programs using a survey sampling, cluster analysis, and multivariate regression approach.
Volume 4 of the Better Buildings Neighborhood Program Evaluation Report assesses the degree to which the Better Buildings Neighborhood Program met its process goals and objectives to identify the most effective program design and implementation approaches.
Volume 5 of the Better Buildings Neighborhood Program Evaluation Report provides findings from a comprehensive impact, process, and market effects evaluation of the program period, spanning from September 2010 through August 2013.
Volume 6 of the Better Buildings Neighborhood Program Evaluation Report provides findings from a comprehensive impact, process, and market effects evaluation of the program period, spanning from September 2010 through August 2013. This volume includes case studies that describe successful strategies that programs used during the evaluation period.
This technical reference manual provides detailed, comprehensive documentation of resource and non-resource savings corresponding to the Energy Efficiency Fund program and individual Conservation and Load Management (C&LM) program technologies.
This Multifamily Technical Reference Manuals (TRMs) provide documentation for the Trust's calculation of energy and demand savings from energy efficiency measures.
Because of its potential to reduce customers’ first costs and leverage private funds, financing has been increasing in importance as a strategy for facilitating energy upgrades as program administrators seek to meet ambitious goals in a shifting energy efficiency landscape. This paper evaluates the experience of BBNP grantees to identify how programs can most effectively integrate loan offerings into their broader efforts to promote energy efficiency upgrades. The paper also identifies best practices from grantees’ experience related to integrating financing into program outreach and trade ally interactions.
The Recovery Act Evaluation was performed to provide information on the costs and benefits of WAP services in different parts of the country and for different types of housing. It was also performed to provide a comprehensive picture of the Program (including the characteristics of the clients, housing stock, and service providers), assess program administration, document experiences during the Recovery Act period, and conduct several special studies.
The Retrospective Evaluation was performed to provide information on the costs and benefits of WAP services in different parts of the country and for different types of housing. It was also performed to provide a comprehensive picture of the Program (including the characteristics of the clients, housing stock, and service providers) and assess program administration.
This study examined consumer awareness and opinions concerning the New Jersey Clean Energy Program (NJCEP). Research areas included New Jersey homeowners' awareness of NJCEP, an assessment of attitudes towards energy efficiency, the main benefits associated with energy efficiency, key drivers associated with purchasing energy efficient products, the best methods for increasing consumers awareness of NJCEP, and obstacles to implementing energy efficiency measures in the home.
This report details findings from the evaluation of the Colorado energy efficiency financing program.
This presentation discusses Build It Green's new model for contractor engagement that provides more support to higher performing contractors and strategies the organization is using to address issues with contractor data reporting and tracking.
This report proposes a set of data elements that should be collected for each residential and non-residential project, including borrower, property, project, and financing information at the time of the installation. The data set also includes post-installation information on the performance of both the financing and the project. These data elements were selected based on an assessment of various data “users” (financial institutions, policy makers, vendors, program administrators, etc.) and their “uses” for the data (what questions would the users want the data to answer). The report also sets out the sources of the data and a methodology for collecting, managing and providing access to the data, and addresses privacy issues and the use of data anonymization and aggregation.
The study involved on-site visits to 180 single-family homes across Connecticut. The team assessed compliance with the weatherization standard using both the prescriptive and performance paths and made recommendations to improve program quality.
Demonstrating Success and Sustaining Impact
This webcast is part of a three-part series on communications strategies and methods. It focuses on how communities can effectively showcase the benefits and successes of a clean energy initiative to ensure additional funding opportunities, continued engagement, and sustained behavior change.
This presentation describes how APS' decision to switch to flexible requirements for energy assessment and modeling software and data transfer using HPXML standards reduced administrative time and improved contractor satisfaction.
This report was prepared to provide an overview and analysis of results and lessons learned under Efficiency Vermont’s program from 2011-2013. The aim was to explore the factors that motivate customers to initiate and complete retrofit projects, how have these factors influenced the growth and development of the program, and opportunities to update and evolve the program.
This summary report provides scientific results, lessons learned, and recommendations for driving energy efficiency in existing buildings on an urban scale. It includes program marketing lesson learned, such as: personal outreach and call to action events are critical marketing opportunities.
Energy Efficiency and Conservation Loan Program Webinar Series: #1 Overview and Cost Effectiveness
This webinar is the first (in a series of six) hosted by USDA Rural Utility Service (RUS) and focusing on the Energy Efficiency and Conservation Loan Program (EECLP). This webinar provides an overview of the Energy Efficiency and Conservation Loan Program. It covers the requirements and benefits of the program and also discusses steps you can take to evaluate the cost effectiveness of energy program options.
Energy Efficiency and Conservation Loan Program Webinar Series: #2 Evaluation, Monitoring & Verification
This webinar is the second (in a series of six) hosted by USDA Rural Utility Service (RUS) and focusing on the Energy Efficiency and Conservation Loan Program (EECLP). This webinar covers the key concepts of Evaluation, Monitoring & Verification (EM&V), gives an overview of the full process, from estimating savings before programs are implemented to measuring and verifying the savings at the end. The webinar also covers EM&V framework, evaluation plans, technical reference manuals and measurement and verification studies.
Energy Efficiency and Conservation Loan Program Webinar Series: #3 Residential Energy Efficiency Deep Dive, Part One
This webinar is the third (in a series of six) hosted by USDA Rural Utility Service (RUS) and focusing on the Energy Efficiency and Conservation Loan Program (EECLP). The first in a two-part series, this webinar shares best practices from the more than 40 competitively selected state and local governments who participated in the U.S. Department of Energy’s Better Buildings Neighborhood Program, including market position and business model, program design and customer experience, evaluation and data collection, marketing and outreach, financing, and contractor engagement and workforce development.
Energy Efficiency and Conservation Loan Program Webinar Series: #4 Residential Energy Efficiency Deep Dive, Part Two
This webinar is the fourth (in a series of six) hosted by USDA Rural Utility Service (RUS) and focusing on the Energy Efficiency and Conservation Loan Program (EECLP). The second in a two-part series, this webinar shares best practices from the more than 40 competitively selected state and local governments who participated in the U.S. Department of Energy’s Better Buildings Neighborhood Program. This webinar focuses on data collection and continuous improvement, partnering with financial institutions, community-based outreach, and quality assurance of contractor work. It also features a case study from Jackson Electric Member Corporation about their audit tools, rebates and loans, tracking and reporting, and marketing and advertising strategies.
Energy Efficiency and Conservation Loan Program Webinar Series: #5 On-Bill Financing
This webinar is the fifth (in a series of six) hosted by USDA Rural Utility Service (RUS) and focusing on the Energy Efficiency and Conservation Loan Program (EECLP). This webinar focuses on financing energy improvements on utility bills and features case studies about Roanoke Electric Cooperative's Upgrade to Save program and North Arkansas Electric Cooperative. It also provides information for programs seeking on-bill financing project assistance.
Energy Efficiency Cost-Effectiveness Testing
This webcast provides an introduction to cost-effectiveness testing for energy efficiency programs. It also covers key drivers in the cost-effectiveness results and cost-effectiveness tools developed for the U.S. Department of Energy.
Energy Efficiency Cost-Effectiveness Testing Forecasting
This webcast provides an introduction to cost-effectiveness testing for energy efficiency programs, key drivers in the cost-effectiveness results, and cost effectiveness tool developed for the U.S. Department of Energy.
Energy Efficiency Measure Cost Studies
This webcast discusses evaluation of costs for energy efficiency measures.
Insights from Efficiency Maine related to Workforce Development.
Long-Run Savings and Cost-Effectiveness of Home Energy Reports
This webcast discusses the savings and cost-effectiveness of home energy reports programs.
This evaluation plan for the New Hampshire Public Utilities Commission includes a market assessment framework which includes indicators of progress toward market transformation; evaluation recommendations for the 2015-2016 program implementation period; and a 6-year evaluation plan for each program or customer sector.
This evaluation and research plan sets out a proposed process for establishing and executing a detailed evaluation and research plan for New Jersey's Clean Energy Program.
This memo provides a review of the New Jersey Comfort Partners Energy Saving Protocols, recommends changes to the calculations and additional calculation protocols for measures not included, and calculates engineering estimates for those proposed energy savings formulas.
This presentation provides an overview of the results and lessons learned from 41 community partners that participated in the Better Buildings Neighborhood Program. It also provides an overview of the Better Buildings Residential Program Solution Center.
Quick summaries of strategies various programs have used to improve the efficiency of delivering efficiency.
Overview of lessons learned from EnergySmart Colorado's energy advisor model.
This report presents the impact evaluation conducted of the 13 programs in the Southeast Consortium Better Buildings Neighborhood Program (BBNP).
This report presents the phase 1 process evaluation conducted of the 13 programs in the Southeast Consortium Better Buildings Neighborhood Program (BBNP).
This report presents the phase 2 process evaluation conducted of the 13 programs in the Southeast Consortium Better Buildings Neighborhood Program (BBNP).
This report provides an independent analysis of the job creation impact of DOE's investment in energy efficiency programs, from 2010 to 2013. The analysis calculates the job creation results that would have occurred in the Southeast, based on the prevailing economic conditions from 2010 to 2013, had DOE invested in sectors other than energy efficiency.
This report demonstrates the results achieved to date by the Southeast Energy Efficiency Alliance. It highlights the experiences of Consortium programs, their successes driving further investments in energy efficiency improvements, and the challenges that hindered their progress. It also details the infrastructure, resources, and opportunities that support the deployment of energy efficiency programming, and the approaches that the Consortium has found best suited to the region.
This report provides an independent analysis of the economic performance of SEEA's 13-city, U.S. Department of Energy-funded energy efficiency upgrade consortium from 2010 to 2013. It estimates the net impacts of SEEA's energy efficiency programs on the economy of the southeast region as a whole, and on the economies of the states with participating programs.
Evaluation of the Efficiency Maine Trust Residential Direct Install Program: Final Evaluation Report
Lessons Learned: Measuring Program Outcomes and Using Benchmarks
Preliminary Impact Evaluation of the U.S. Department of Energy's Better Buildings Neighborhood Program
Preliminary Process and Market Evaluation: Better Buildings Neighborhood Program
This interim evaluation report examines the design, delivery, and market effects of each of the Southeast Energy Efficiency Alliance's (SEEA) thirteen sub-grantee programs and identifies opportunities to increase each program's success, and quantifies and verifies the energy savings achieved through the programs' funded home energy improvements and the cost-effectiveness of those savings.
STEP was developed with a mission to "create a model community energy transformation program that serves as a roadmap for other small towns across the U.S." This final technical report summarizes the program's comprehensive energy evaluations for homes.
Presentation on how Michigan Saves realigned its incentives to encourage more projects with significant energy savings potential.
This progress report provides community members and others interested in EnergySmart with a clear snapshot of its progress. The report also provides a timeline of energy efficiency policies and programs in Boulder County.
NeighborWorks of Western Vermont (NWWVT) contracted with The Cadmus Group, Inc., to evaluate its H.E.A.T. Squad program. The evaluation activities informed two main areas of interest: program and market effects, and impact and cost-effectiveness. To inform the evaluation, Cadmus surveyed participant and non-participant homeowners and interviewed program stakeholders.
This report presents key findings and recommendations from the process evaluation of Clean Energy Works Oregon's (now Enhabit's) energy efficiency financing program. Table 1 provides a good list of key process evaluation research questions which may help others scope comprehensive process evaluations.
Pacific Power contracted with The Cadmus Group, Inc., to conduct impact and process evaluations of its Washington low-income weatherization program for the program period extending from March 2009 through February 2011. The impact evaluation assessed energy savings and cost-effectiveness associated with the program, and in doing so quantified select non-energy benefits. The process evaluation assessed program delivery and efficacy, potential bottlenecks, opportunities for improvements, and participants’ experiences and satisfaction with the program.
Evaluation reports from the Seattle Community Power Works program. The city of Seattle worked to encourage efficiency upgrades for single-family and multi-family residences, small businesses, hospitals, and large commercial and municipal buildings.
This mid-program evaluation includes extensive analysis of program sectors, including results of surveys of participants, and summarizes lessons learned to date.
EnergySmart Colorado uses surveys and a customer database to get feedback from homeowners that helps fine-tune program services and operations.