This report includes a billing analysis, process evaluation, and baseline study for the Connecticut Residential New Construction (RNC) program. It also includes the results of the process evaluation.

This report consists of a literature review and in-depth interviews with subject matter experts in the Home Performance with ENERGY STAR (HPwES) program area. The goal was to compare Delaware Sustainable Energy Utility (DESEU) HPwES Programs with peer-programs across the United States. The report also identifies key metrics and emerging trends regarding program design.

This report is an update of findings from three prior evaluations of Eversource's Home Energy Reports (HERs) Pilot Program. The HERs pilot program began in January 2011. The pilot program randomly selected residential customers to whom it sent reports rating their energy use, comparing it to that of their neighbors, and suggested ways for the households to save energy.

Focus on Energy, Columbia Water & Light, and utilities from the Energize Connecticut program share how they integrate and implement the Home Energy Score and Home Performance with ENERGY STAR programs.

This report for the Connecticut Energy Efficiency Board provides a review of best practices in impact evaluation, recommendations for calculating oil and propane savings, and discusses the impact evaluation findings for the Home Energy Services (HES) and Home Energy Services-Income Eligible (HES-IE) Programs. This best practices review provides an overview of key evaluation protocol and guideline documents.

This report identifies opportunities for Connecticut's Home Energy Solutions program (HES) to increase savings related to air sealing, duct sealing, and insulation.

This report is the process evaluation of the Connecticut Multifamily (MF) Initiative, which leveraged the state's Home Energy Solutions (HES) and Home Energy Solutions-Income Eligible (HES-IE) programs. The objective of this process evaluation is to provide actionable recommendations about how to improve the design, delivery, and administration of the MF Initiative.

This report includes evaluation analysis and findings from the Eversource New Hampshire Home Energy Report pilot program.

This report for the Connecticut Energy Efficiency Board documents the difficulties that evaluators and programs in Connecticut faced in conducting evaluation studies and makes recommendations for improving data quality and consistency.

This presentation discusses the energy efficiency reporting tool for public power utilities. The tool is an Excel-based template is designed to produce consistent, useful metrics on program investments and performance for small to medium-sized administrators of public power efficiency programs.

This webinar covers the Multifamily Energy Efficiency Retrofits: Barriers and Opportunities for Deep Energy Savings report published in 2016.n

This technical reference manual provides detailed, comprehensive documentation of resource and non-resource savings corresponding to the Energy Efficiency Fund program and individual Conservation and Load Management (C&LM) program technologies.

This webinar is the sixth (in a series of six) hosted by USDA Rural Utility Service (RUS) and focusing on the Energy Efficiency and Conservation Loan Program (EECLP). This webinar provides an overview of Solar Photovoltaic (PV) Opportunities and the Energy Efficiency and Conservation Loan Program. It features the New Hampshire Electric Co-op's Solar PV Program and SunShot Solar Outreach Partnership (SolarOPs). SolarOPs is a U.S. Department of Energy program designed to increase the use and integration of solar energy in communities across the US.

This report summarizes the legal framework, need for, and viability of establishing a Residential Property Assessed Clean Energy (R-PACE) program in Connecticut.

The study involved on-site visits to 180 single-family homes across Connecticut. The team assessed compliance with the weatherization standard using both the prescriptive and performance paths and made recommendations to improve program quality.

The Multi-State Residential Retrofit Project is a residential energy-efficiency pilot program, funded by a competitive U.S. State Energy Program (SEP) award through the U.S. Department of Energy. The Multi-State Project operates in four states: Alabama, Massachusetts, Virginia, and Washington. During the course of this three-year process evaluation, Cadmus worked closely with NASEO and the four states to collect information about the programs from many perspectives, including: State Energy Office staff, program implementers, homeowners, auditors/contractors, real estate professionals, appraisers, lenders, and utility staff. This report discusses: the project’s context; its goals; the evaluation approach and methods; cross-cutting evaluation results; and results specific to each of the four states.

This evaluation plan for the New Hampshire Public Utilities Commission includes a market assessment framework which includes indicators of progress toward market transformation; evaluation recommendations for the 2015-2016 program implementation period; and a 6-year evaluation plan for each program or customer sector.

This webcast discusses the background for U.S. Department of Energy’s Smart Grid Investment Grant (SGIG) consumer behavior study effort; the various utilities who are participating and what they each plan to include their respective studies; the quantitative results and qualitative lessons learned thus far from these studies; and the types of research will be undertaken by LBNL over the next several years.

This webcast provided an overview to the PowerSaver Loan; described the role of financing in home energy efficiency projects and examples of program's experience; introduced how DOE program sponsors and partners can utilize PowerSaver to offer affordable energy efficiency loans to homeowners; and discussed options, strategies and next steps for interested programs to partner with participating PowerSaver lender(s).

This presentation discusses the new approach to training that Seattle's Community Power Works program is using to support its high-road workforce agreement.

Webcast on utility forward capacity markets and how energy efficiency programs may access these markets as a potential source of revenues.

A list of tips from Connecticut's Neighbor to Neighbor Energy Challenge for working with utilities to access energy usage data.

Presentation on the SustainableWorks non-profit general contractor model for supporting energy upgrades in Washington state and lessons learned for implementing a whole house approach.

Presentation describing the San Antonio program and tactics used to drive demand and enhance service delivery to make the program simpler for customers.

This presentation highlights the Connecticut Energy Efficiency Fund's efforts to integrate HVAC contractors, builders, and remodelers into its home performance program, which expanded its customer base and significantly scaled up the program. It includes lessons on outreach strategies for integrating these types of contractors into the program.

This presentation describes Connecticut Neighbor to Neighbor Energy Challenge program and lessons learned on community engagement as a driver of demand.

Pacific Power contracted with The Cadmus Group, Inc., to conduct impact and process evaluations of its Washington low-income weatherization program for the program period extending from March 2009 through February 2011. The impact evaluation assessed energy savings and cost-effectiveness associated with the program, and in doing so quantified select non-energy benefits. The process evaluation assessed program delivery and efficacy, potential bottlenecks, opportunities for improvements, and participants’ experiences and satisfaction with the program.

The RePower programs in Washington State convened local community leaders, organizations, contractors, and program partners for a planning summit to consider the benefits and challenges of different business models for the post-grant period. Participants considered four models: non-profit organization, utility, county or city government, and private sector.

This presentation describes Washington's RePower program and lessons learned on community engagement as a driver of demand.

Evaluation reports from the Seattle Community Power Works program. The city of Seattle worked to encourage efficiency upgrades for single-family and multi-family residences, small businesses, hospitals, and large commercial and municipal buildings.

This mid-program evaluation includes extensive analysis of program sectors, including results of surveys of participants, and summarizes lessons learned to date.

This mid-program evaluation includes extensive analysis of program sectors, including results of surveys of participants, and summarizes lessons learned to date.

Connecticut's Neighbor to Neighbor Energy Challenge's perspective on their partnership with Northeast Utilities.

Connecticut's Neighbor to Neighbor Energy Challenge uses dashboards that display key project data for administrators and contractors to monitor progress over time. The program has evaluated performance at different steps in the process and identified strategies to improve performance where needed, such as sales training for contractors, energy advisors, monthly contractor scorecards, and multiple customer "touches." These improvements increased the close rate from 26 to 60 percent in one year.

An introduction to Austin Energy's workforce development program, which helps engage contractors in efforts to make homes more energy efficient.

Headquartered at The University of Texas at Austin, Pecan Street Inc. is a research and development organization focused on developing and testing advanced technology, business model and customer behavior surrounding advanced energy management systems. Their flagship effort is the Pecan Street Demonstration Project that began in an Austin community. This presentation discusses collecting and using data to assess and improve the Pecan Street Project.

This presentation shares how the Neighbor to Neighbor Energy Challenge collected and evaluated data and used the results to improve its program.

Experimental design is often used to increase certainty about the actual impacts of a program and what strategies are worth repeating going forward. This webcast reviewed some experimental design techniques and gave examples of how they might fit into your programs.

This presentation explores the community-based social marketing aspects of RePower Bainbridge and includes insights on knowing your audience, market barriers, and leverage opportunities.

This planning document from Community Power Works of Seattle, Washington, includes flow charts and tables designed to help guide both the initial launch of the program, which includes setting goals, and its ongoing development.

This presentation outlines the steps Connecticut's Neighbor to Neighbor Energy Challenge program took to obtain and sort useful feedback from surveys and volunteer observations.

This webcast highlights lessons learned from programs that have used loan loss reserve funds.

This webcast highlights programs that actively engage the contractor community in program design and implementation. Several contractors share their views on best practices for Marketing & Outreach.

This webcast featured four presentations providing examples and best practices for revolving loan funds.