This study provides an overview of practices for quantifying and reporting avoided energy-water costs from demand-side measures. It also summarizes the regulatory guidance for incorporating water savings into cost-effectiveness screening for energy efficiency programs.
Showing results 1 - 32 of 32
This report consists of a literature review and in-depth interviews with subject matter experts in the Home Performance with ENERGY STAR (HPwES) program area. The goal was to compare Delaware Sustainable Energy Utility (DESEU) HPwES Programs with peer-programs across the United States. The report also identifies key metrics and emerging trends regarding program design.
The catalog is a compilation of state and local energy efficiency potential studies to serve as a resource for energy planners and as a baseline for future analyses.
This report updates ACEEE's 2013 assessment of multifamily energy efficiency programs in US metropolitan areas with the most multifamily households. Using housing, policy, and utility-sector data from 2014 and 2015, this report documents how these programs have changed in the context of dynamic housing markets and statewide policy environments. The report also offers an analysis of the number, spending, offerings, and targeted participants of current programs and their potential for further expansion.
This report reviews Ouachita Electric Cooperative's transition to its HELP PAYS® tariffed on-bill investment program. This analysis uses data for the first nine months of the program launched in 2016. Some of those benefits are being validated immediately by the market response in the service area compared to the same period of the prior year with HELP, the on-bill financing program that HELP PAYS replaced.
This report examines the history of pay-for-performance (P4P) energy efficiency approaches. As the report describes, there is a diverse spectrum of pay-for-performance programs but, at the most basic level, these programs track and reward energy savings as they occur, usually by examining data from a building's energy meters -- as opposed to the more common approach of estimating savings in advance of installation and offering upfront rebates or incentives in a lump-sum payment. The report finds that P4P has some important opportunities for increasing energy savings, but also key limitations that will need to be better understood through piloting and experimentation.
Each ResStock fact sheet presents the potential for residential energy and utility bill savings for the state. The top ten energy savings home improvements are highlighted.
This guide supports the development, maintenance, and use of accurate and reliable Technical Reference Manuals (TRMs). TRMs provide information to estimate the energy and demand savings of end-use energy efficiency measures associated with utility customer-funded efficiency programs. This guide describes existing TRMs in the United States and provides recommendations for TRM best practices. It also offers related background information on energy efficiency; evaluation, measurement, and verification; and TRM basics.
SWEPCO's Authorization to Release Information Form is used to release a customer's historical electric usage to a gridSMART Network Contractor.
The report, based on U.S. Bureau of Labor Statistics data and a survey of tens of thousands of businesses across the country, provides detailed breakdowns of clean energy jobs not available previously, and it was developed and released in connection with a major U.S. Department of Energy study of all energy jobs in America.
This guide for states highlights energy efficiency as a least-cost strategy to meet air pollution reduction and other policy objectives, including energy affordability and reliability. It presents established policy and program “pathways” to advance demand-side energy efficiency.
Using Deemed Savings and Technical Reference Manuals for Efficiency Programs and Projects
Applying well documented stipulated (deemed) values is a common practice for determining the savings from energy efficiency projects and programs and the databases where such deemed values are cataloged are called Technical Reference Manuals (TRMs). This webcast introduces the use of deemed savings, information on setting up and updating TRMs, lessons learned, and resources for state officials. As examples, speakers discuss the content and development processes used for the Northwest regional TRM and the Iowa state TRM.
This Guide is designed to help state and local policymakers to take full advantage of new policy developments by providing them with a comprehensive set of tools to support launching or accelerating residential energy efficiency programs. The Guide focuses on four categories of policies that have proven particularly effective in providing a framework within which residential energy efficiency programs can thrive: incentives and financing, making the value of energy efficiency visible in the real estate market, data access and standardization, and supporting utility system procurement of energy efficiency.
The Guide to Action provides in-depth information about over a dozen policies and programs that states are using to meet their energy, environmental, and economic objectives with energy efficiency, renewable energy, and combined heat and power. Each policy description is based on states’ experiences in designing and implementing policies, as documented in existing literature and shared through peer-exchange opportunities provided to states by EPA’s State Climate and Energy Program.
Energy efficiency collaboratives vary greatly and are typically designed for a specific jurisdiction, making them hard to compare side by side. This guide seeks to highlight a few common elements and draw conclusions on the overall effectiveness of specific characteristics of collaboratives. This guide defines and examines four different types of collaboratives in terms of their origin, scope, decision-making method, membership, duration, available resources, and how they interact with and influence their respective commissions.
This presentation covers the New York On-Bill recovery financing, Home Energy Lending Program's (H.E.L.P.) loan program, and California energy efficiency financing products.
This guide identifies 12 best practices for policymakers, regulators, and program administrators to help building owners invest to increase the energy efficiency of multifamily affordable housing.
This summary from a Better Buildings Residential Network peer exchange call focused on the challenges, requirements and opportunities to advance staged upgrades in the home upgrade market.
Presents the loan loss reserve guidelines for the Arkansas Residential Energy Efficiency Loan Loss Reserve Program.
Developed as part of the Residential Building Stock Assessment (RBSA), this report provides overall housing utility and energy statistics for Montana, and details the type and efficiency of various components such as windows, insulation, appliances and type of heating fuel used in homes with each region of the state.
This report is a comprehensive research study of energy efficiency in Northwest residential buildings. It includes a metering study, a single-family report, a manufactured homes report, and a multi-family report. In addition, it includes state-by-state energy use reports, as well as end-use consumption data.
This report provides an independent analysis of the job creation impact of DOE's investment in energy efficiency programs, from 2010 to 2013. The analysis calculates the job creation results that would have occurred in the Southeast, based on the prevailing economic conditions from 2010 to 2013, had DOE invested in sectors other than energy efficiency.
This report demonstrates the results achieved to date by the Southeast Energy Efficiency Alliance. It highlights the experiences of Consortium programs, their successes driving further investments in energy efficiency improvements, and the challenges that hindered their progress. It also details the infrastructure, resources, and opportunities that support the deployment of energy efficiency programming, and the approaches that the Consortium has found best suited to the region.
Collaboration and Consensus Building in States to Support Energy Efficiency as a Resource
Furthering Your Local Governments' Energy Efficiency Goals: Part 1 - Getting Support From Local Leaders
This webcast shares useful and effective strategies for getting local leaders to support local government's energy efficiency goals.
Managing Financing Programs: Spreadsheet Models
This report helps policymakers understand how electric and natural gas utilities can achieve greater efficiency by establishing numeric energy savings targets and goals for energy efficiency programs.
This report describes how utility planning processes that allow demand-side resources to compete with supply-side resources can promote cost-effective energy efficiency.
This report provides an overview of evaluation, measurement, and verification approaches used to estimate the load impacts and effectiveness of energy efficiency programs.
This report provides guidance on determining the efficiency potential in a utility footprint, state, or region; evaluating efficiency as a supply-side resource; and developing detailed efficiency program plans.