This study provides an overview of practices for quantifying and reporting avoided energy-water costs from demand-side measures. It also summarizes the regulatory guidance for incorporating water savings into cost-effectiveness screening for energy efficiency programs.
Showing results 1 - 30 of 30
This report updates ACEEE's 2013 assessment of multifamily energy efficiency programs in US metropolitan areas with the most multifamily households. Using housing, policy, and utility-sector data from 2014 and 2015, this report documents how these programs have changed in the context of dynamic housing markets and statewide policy environments. The report also offers an analysis of the number, spending, offerings, and targeted participants of current programs and their potential for further expansion.
This report examines the history of pay-for-performance (P4P) energy efficiency approaches. As the report describes, there is a diverse spectrum of pay-for-performance programs but, at the most basic level, these programs track and reward energy savings as they occur, usually by examining data from a building's energy meters -- as opposed to the more common approach of estimating savings in advance of installation and offering upfront rebates or incentives in a lump-sum payment. The report finds that P4P has some important opportunities for increasing energy savings, but also key limitations that will need to be better understood through piloting and experimentation.
Each ResStock fact sheet presents the potential for residential energy and utility bill savings for the state. The top ten energy savings home improvements are highlighted.
This report is a guide to all customer-facing financing products—products offered by a lender directly to a borrower—used to pay for energy efficiency. Intended for state and local governments that are deciding whether to start a new program, tune up and existing program, or create a Green Bank, it provides information on the full range of financing product options for target participants, the tradeoffs of various products, and potential advantages and disadvantages for different types of customers.
The report, based on U.S. Bureau of Labor Statistics data and a survey of tens of thousands of businesses across the country, provides detailed breakdowns of clean energy jobs not available previously, and it was developed and released in connection with a major U.S. Department of Energy study of all energy jobs in America.
This report discusses indoor air quality issues, including: wildfire smoke, dampness, and mold, and the effect of energy efficiency upgrades on these health-related issues. The report describes current state policies and programs in these areas, highlighting approaches for consideration by other jurisdictions.
Energy burden is the percentage of household income spent on home energy bills. In this report, ACEEE, along with the Energy Efficiency for All coalition, measures the energy burden of households in 48 of the largest American cities. The report finds that low-income, African-American, Latino, low-income multifamily, and renter households all spend a greater proportion of their income on utilities than the average family. The report also identifies energy efficiency as an underutilized strategy that can help reduce high energy burdens by as much as 30%. Given this potential, the report goes on to describe policies and programs to ramp up energy efficiency investments in low-income and underserved communities.
Energy efficiency is good for you--and for the air you breathe, the water you drink, and the community in which you live. This fact sheet shows how saving energy reduces air and water pollution and conserves natural resources, which in turn creates a healthier living environment for people everywhere. It includes the stories of a family in Pennsylvania and a hospital in Florida.
This guide for states highlights energy efficiency as a least-cost strategy to meet air pollution reduction and other policy objectives, including energy affordability and reliability. It presents established policy and program “pathways” to advance demand-side energy efficiency.
This Guide is designed to help state and local policymakers to take full advantage of new policy developments by providing them with a comprehensive set of tools to support launching or accelerating residential energy efficiency programs. The Guide focuses on four categories of policies that have proven particularly effective in providing a framework within which residential energy efficiency programs can thrive: incentives and financing, making the value of energy efficiency visible in the real estate market, data access and standardization, and supporting utility system procurement of energy efficiency.
The Guide to Action provides in-depth information about over a dozen policies and programs that states are using to meet their energy, environmental, and economic objectives with energy efficiency, renewable energy, and combined heat and power. Each policy description is based on states’ experiences in designing and implementing policies, as documented in existing literature and shared through peer-exchange opportunities provided to states by EPA’s State Climate and Energy Program.
Energy efficiency collaboratives vary greatly and are typically designed for a specific jurisdiction, making them hard to compare side by side. This guide seeks to highlight a few common elements and draw conclusions on the overall effectiveness of specific characteristics of collaboratives. This guide defines and examines four different types of collaboratives in terms of their origin, scope, decision-making method, membership, duration, available resources, and how they interact with and influence their respective commissions.
Among the many benefits ascribed to energy efficiency is the fact that it can help create jobs. Although this is often used to motivate investments in efficiency programs, verifying job creation benefits is more complicated than it might seem at first. This paper identifies some of the issues that contribute to a lack of consistency in attempts to verify efficiency-related job creation. It then proposes an analytically rigorous and tractable framework for program evaluators to use in future assessments.
This report provides an overview of the current state of on-bill programs and provides actionable insights on key program design considerations for on-bill lending programs.
Developed as part of the Residential Building Stock Assessment (RBSA), this report provides overall housing utility and energy statistics for Montana, and details the type and efficiency of various components such as windows, insulation, appliances and type of heating fuel used in homes with each region of the state.
This report is a comprehensive research study of energy efficiency in Northwest residential buildings. It includes a metering study, a single-family report, a manufactured homes report, and a multi-family report. In addition, it includes state-by-state energy use reports, as well as end-use consumption data.
This article discusses alternative formats for training students on building science, energy assessments, and energy efficiency upgrade installation. These include using videos instead of class lectures, maximizing hands-on activities, using social learning, and learning from games.
This report provides state and local policymakers with information on successful approaches to the design and implementation of residential efficiency programs for households ineligible for low-income programs.
This report summarizes research assessing national and regional residential behavior-based energy efficiency (BBEE) programs and activities to identify best practices. The report emphasizes that a basic foundation for behavior change is providing energy consumers with feedback on their energy consumption, with customer engagement strategies and tactics employed to get customers to take action and drive greater levels of energy savings.
This report describes how utility planning processes that allow demand-side resources to compete with supply-side resources can promote cost-effective energy efficiency.
This report identifies and discusses factors that should be considered in evaluating model choices for administering and implementing ratepayer funded energy efficiency programs.
This report presents best practices for operating successful portfolio-level efficiency programs, including assessing efficiency potential, cost-effectiveness screening, and developing a portfolio of approaches.
This guide provides background on the home improvement market in the U.S. and Canada and end users and systems in existing homes, as well as a description of energy efficiency program approaches and strategies.
This report considers consumers' perspectives on policy and regulatory issues associated with the administration of energy efficiency investments funded by ratepayers of electric and natural gas utilities.
This report summarizes the scale and economic value of energy efficiency for reducing carbon emissions and discusses barriers to achieving the potential for cost-effective energy efficiency.
This report provides guidance on determining the efficiency potential in a utility footprint, state, or region; evaluating efficiency as a supply-side resource; and developing detailed efficiency program plans.
This report describes the key issues, best practices, and main process steps for integrating energy efficiency into resource planning on an equal basis with other resources.
The purpose of this study is to furnish comprehensive information on ratepayer-funded low-income energy programs. This study includes information on and analysis of the energy needs of low-income households, the legal and regulatory framework supporting ratepayer-funded programs, program design options, and the findings from evaluations of program effectiveness.