Among the many benefits ascribed to energy efficiency is the fact that it can help create jobs. Although this is often used to motivate investments in efficiency programs, verifying job creation benefits is more complicated than it might seem at first. This paper identifies some of the issues that contribute to a lack of consistency in attempts to verify efficiency-related job creation. It then proposes an analytically rigorous and tractable framework for program evaluators to use in future assessments.
Showing results 101 - 162 of 162
The report presents an analysis of the market performance of third-party certified sustainable residential properties in the Portland and Seattle metropolitan areas. In each location, a sample of third-party certified homes was selected and comparable homes were found. The author documents that certified homes in the Seattle metro area sold at a price premium of 9.6% when compared to noncertified counterparts.
The purpose of this study is to furnish comprehensive information on ratepayer-funded low-income energy programs. This study includes information on and analysis of the energy needs of low-income households, the legal and regulatory framework supporting ratepayer-funded programs, program design options, and the findings from evaluations of program effectiveness.
The Guide to Action provides in-depth information about over a dozen policies and programs that states are using to meet their energy, environmental, and economic objectives with energy efficiency, renewable energy, and combined heat and power. Each policy description is based on states’ experiences in designing and implementing policies, as documented in existing literature and shared through peer-exchange opportunities provided to states by EPA’s State Climate and Energy Program.
This report represents NEEP’s annual assessment of the major policy developments of 2014, as well as its look into the immediate future, where NEEP gauge states’ progress toward capturing cost-effective energy efficiency as a first-order resource. While looking at the region as a whole, NEEP also provides summary and analysis of some of the biggest building energy efficiency successes and setbacks from Maine to Maryland — including significant energy efficiency legislation and regulations and changes in funding levels for energy efficiency programs.
This report provides guidance on determining the efficiency potential in a utility footprint, state, or region; evaluating efficiency as a supply-side resource; and developing detailed efficiency program plans.
This report describes the key issues, best practices, and main process steps for integrating energy efficiency into resource planning on an equal basis with other resources.
This report presents best practices for operating successful portfolio-level efficiency programs, including assessing efficiency potential, cost-effectiveness screening, and developing a portfolio of approaches.
This report describes how utility planning processes that allow demand-side resources to compete with supply-side resources can promote cost-effective energy efficiency.
This report identifies and discusses factors that should be considered in evaluating model choices for administering and implementing ratepayer funded energy efficiency programs.
This report provides information on how energy use data access can help state governments lead by example through benchmarking and disclosing results and implement benchmarking policies for the private sector.
This report presents the results of a scoping study to assess the need for national databases that can support best practices in energy efficiency program evaluation, measurement, and verification (EM&V).
This report provides an overview of the current state of on-bill programs and provides actionable insights on key program design considerations for on-bill lending programs.
This report provides state and local policymakers with information on successful approaches to the design and implementation of residential efficiency programs for households ineligible for low-income programs.
This report is a comprehensive research study of energy efficiency in Northwest residential buildings. It includes a metering study, a single-family report, a manufactured homes report, and a multi-family report. In addition, it includes state-by-state energy use reports, as well as end-use consumption data.
Developed as part of the Residential Building Stock Assessment (RBSA), this report provides overall housing utility and energy statistics for Washington, and details the type and efficiency of various components such as windows, insulation, appliances and type of heating fuel used in homes with each region of the state.
This report consists of a literature review and in-depth interviews with subject matter experts in the Home Performance with ENERGY STAR (HPwES) program area. The goal was to compare Delaware Sustainable Energy Utility (DESEU) HPwES Programs with peer-programs across the United States. The report also identifies key metrics and emerging trends regarding program design.
This Technical Reference Manual (TRM) defines the consensus calculations of the electric and natural gas energy savings and the electric demand reductions, achieved from installing energy efficiency and renewable energy measures that are supported by Focus on Energy programs.
This report is the process evaluation of the Connecticut Multifamily (MF) Initiative, which leveraged the state's Home Energy Solutions (HES) and Home Energy Solutions-Income Eligible (HES-IE) programs. The objective of this process evaluation is to provide actionable recommendations about how to improve the design, delivery, and administration of the MF Initiative.
This report for the Connecticut Energy Efficiency Board documents the difficulties that evaluators and programs in Connecticut faced in conducting evaluation studies and makes recommendations for improving data quality and consistency.
This report for the Connecticut Energy Efficiency Board provides a review of best practices in impact evaluation, recommendations for calculating oil and propane savings, and discusses the impact evaluation findings for the Home Energy Services (HES) and Home Energy Services-Income Eligible (HES-IE) Programs. This best practices review provides an overview of key evaluation protocol and guideline documents.
This report includes a billing analysis, process evaluation, and baseline study for the Connecticut Residential New Construction (RNC) program. It also includes the results of the process evaluation.
This report is an update of findings from three prior evaluations of Eversource's Home Energy Reports (HERs) Pilot Program. The HERs pilot program began in January 2011. The pilot program randomly selected residential customers to whom it sent reports rating their energy use, comparing it to that of their neighbors, and suggested ways for the households to save energy.
This technical reference manual provides detailed, comprehensive documentation of resource and non-resource savings corresponding to the Energy Efficiency Fund program and individual Conservation and Load Management (C&LM) program technologies.
Pacific Power contracted with The Cadmus Group, Inc., to conduct impact and process evaluations of its Washington low-income weatherization program for the program period extending from March 2009 through February 2011. The impact evaluation assessed energy savings and cost-effectiveness associated with the program, and in doing so quantified select non-energy benefits. The process evaluation assessed program delivery and efficacy, potential bottlenecks, opportunities for improvements, and participants’ experiences and satisfaction with the program.
Evaluation reports from the Seattle Community Power Works program. The city of Seattle worked to encourage efficiency upgrades for single-family and multi-family residences, small businesses, hospitals, and large commercial and municipal buildings.
The Multi-State Residential Retrofit Project is a residential energy-efficiency pilot program, funded by a competitive U.S. State Energy Program (SEP) award through the U.S. Department of Energy. The Multi-State Project operates in four states: Alabama, Massachusetts, Virginia, and Washington. During the course of this three-year process evaluation, Cadmus worked closely with NASEO and the four states to collect information about the programs from many perspectives, including: State Energy Office staff, program implementers, homeowners, auditors/contractors, real estate professionals, appraisers, lenders, and utility staff. This report discusses: the project’s context; its goals; the evaluation approach and methods; cross-cutting evaluation results; and results specific to each of the four states.
This mid-program evaluation includes extensive analysis of program sectors, including results of surveys of participants, and summarizes lessons learned to date.
This presentation shares how the Neighbor to Neighbor Energy Challenge collected and evaluated data and used the results to improve its program.
Connecticut's Neighbor to Neighbor Energy Challenge uses dashboards that display key project data for administrators and contractors to monitor progress over time. The program has evaluated performance at different steps in the process and identified strategies to improve performance where needed, such as sales training for contractors, energy advisors, monthly contractor scorecards, and multiple customer "touches." These improvements increased the close rate from 26 to 60 percent in one year.
Focus on Energy created these co-branding and logo requirements that trade allies, or participating contractors, must adhere to when creating marketing materials related to the program.
This calendar provides Energize Connecticut's participating contractors with information on upcoming energy efficiency and renewable energy, classes, seminars and conferences.
RePower helped consumers access aggregated information about financing and rebates by compiling a customer-friendly guide to all utility and non-utility incentives in its service area.
The Community Power Works program in Seattle, WA uses a program dashboard to track progress against targets. This is an example dashboard from March 2015, which is updated on a monthly basis with progress toward goals for sign-ups, energy audits, home energy upgrades, and energy savings.
This agreement outlines the goals, contractor standards, hiring standards, training program standards, and procedures for contractor participation in Seattle's Community Power Works program. As a "high-road" agreement, the employment and contracting standards are designed to ensure broad access to economic opportunities for all types of businesses and workers, support training on sustainable career paths, and ensure high-quality work.
Data release form that allows the Connecticut Clean Energy Finance and Investment Authority (CEFIA) to obtain customer utility account and actual energy usage data, energy costs, underwriting and loan repayment records, and data on energy savings measures installed.
In this video interview segment, Yvonne Kraus of Conservation Services Group describes how energy advisors were an important strategy for building trust with customers in the community.
In this video interview segment, Yvonne Kraus of Conservation Services Group describes how program and utility partnerships can co-benefit each other.
In this video interview segment, Will Ranes of RePower Kitsap discusses the importance of understanding your market, including being able to speak the language of utilities and other key players.
In this video interview segment, Yvonne Kraus of Conservation Services Group in Bainbridge Island, Washington, discusses why the RePower program created multiple branding and messaging themes.