This report provides a comprehensive review and analysis of home energy upgrade programs with proven track records, focusing on those with robustly verified savings and constituting good examples for replication. This meta-analysis describes program models and implementation strategies for direct install upgrades; heating, HVAC replacement and early retirement; and comprehensive, whole-home upgrades.
Showing results 1 - 54 of 54
This report examines the history of pay-for-performance (P4P) energy efficiency approaches. As the report describes, there is a diverse spectrum of pay-for-performance programs but, at the most basic level, these programs track and reward energy savings as they occur, usually by examining data from a building's energy meters -- as opposed to the more common approach of estimating savings in advance of installation and offering upfront rebates or incentives in a lump-sum payment. The report finds that P4P has some important opportunities for increasing energy savings, but also key limitations that will need to be better understood through piloting and experimentation.
Each ResStock fact sheet presents the potential for residential energy and utility bill savings for the state. The top ten energy savings home improvements are highlighted.
This report examines how State Energy Offices and state-level partners are supporting growth and uptake of Commercial Property Assessed Clean Energy (C-PACE) financing around the country. The report offers examples, insights, and strategies for State Energy Offices, green banks, state financing agencies, and other public and private entities to catalyze, accelerate, organize, and expand C-PACE markets.
This report details opportunities for scaling up program activity and increasing savings from programs reaching the people who need it most. It discussed best practices from existing programs for overcoming many of the key challenges that program administrators face, including how to address housing deficiencies that prevent energy efficiency upgrades, how to address cost effectiveness challenges, and how to serve hard-to-reach households.
This report explores how governments and energy efficiency implementers could help stakeholders better analyze and act upon building performance data to unlock savings.
This report is a guide to all customer-facing financing products—products offered by a lender directly to a borrower—used to pay for energy efficiency. Intended for state and local governments that are deciding whether to start a new program, tune up and existing program, or create a Green Bank, it provides information on the full range of financing product options for target participants, the tradeoffs of various products, and potential advantages and disadvantages for different types of customers.
The report, based on U.S. Bureau of Labor Statistics data and a survey of tens of thousands of businesses across the country, provides detailed breakdowns of clean energy jobs not available previously, and it was developed and released in connection with a major U.S. Department of Energy study of all energy jobs in America.
This report discusses indoor air quality issues, including: wildfire smoke, dampness, and mold, and the effect of energy efficiency upgrades on these health-related issues. The report describes current state policies and programs in these areas, highlighting approaches for consideration by other jurisdictions.
Energy burden is the percentage of household income spent on home energy bills. In this report, ACEEE, along with the Energy Efficiency for All coalition, measures the energy burden of households in 48 of the largest American cities. The report finds that low-income, African-American, Latino, low-income multifamily, and renter households all spend a greater proportion of their income on utilities than the average family. The report also identifies energy efficiency as an underutilized strategy that can help reduce high energy burdens by as much as 30%. Given this potential, the report goes on to describe policies and programs to ramp up energy efficiency investments in low-income and underserved communities.
This report was developed to help inform national stakeholders about the strategies that have been used to achieve deep energy savings in the multifamily housing sector through energy efficiency upgrades. These strategies could be used as models in areas where utility program administrators and policymakers seek to achieve deep energy savings in the multifamily building stock for the purposes of reducing energy costs, creating comfortable and healthy homes, meeting regulatory requirements, or reducing the environmental impacts of energy consumption. This report includes a national multifamily market characterization, barriers and opportunities for program and policy efforts, and eight exemplary case studies from across the country.
Residential air-source heat pumps (ASHP) are a heating and air-conditioning technology that use electricity to provide a combination of space heating and cooling to homes. A new generation of ASHPs has come to market over the past five years. This report evaluates the key market barriers as well as potential opportunities to leverage. Based on an assessment of the regional ASHP market, it is clear that while ASHPs have established a viable and growing market, there remains a significant opportunity to further accelerate adoption of the technology and in the process achieve energy and cost savings to the Northeast and Mid-Atlantic region.
The U.S. Department of Energy's (DOE) Building America research team, Advanced Residential Integrated Energy Solutions Collaborative (ARIES), worked with four public housing authorities (PHAs) to develop packages of energy-efficiency retrofit measures that PHAs can cost-effectively implement with their own staffs during the normal course of housing operations when units are refurbished between occupancies. More than 1 million public housing units supported by the U.S. Department of Housing and Urban Development (HUD) provide rental housing for eligible low-income families across the country, ranging from single-family houses to multifamily, high-rise apartments.
The multifamily sector can be hard to reach when it comes to energy efficiency programs. Besides being diverse and complex, the sector presents a unique set of challenges to efficiency investments. The result is that multifamily customers are often underserved by energy efficiency programs. Drawing on data requests and interviews with program administrators, this report summarizes the challenges to program participation and identifies best practices that programs can use to reach and retain large numbers of multifamily participants.
The Regional Roundup of Energy Efficiency Policy is intended to give policymakers, regulators, efficiency proponents, program administrators and other stakeholders a comparative view of the progress of energy efficiency policies and programs across the Northeast/Mid-Atlantic region. Along with state-level highlights, the report examines regional trends and shared challenges in harnessing the potential of energy efficiency to meet today’s pressing energy and environmental challenges.
This report looks into residential lighting savings assumptions found in Technical Reference Manuals (TRMs) throughout the Northeast and Mid-Atlantic regions to understand what values were being used for key metrics such as hours of use, delta watt, and measure life. It provides the opportunity to view completed Standardized Methods Forms to compare evaluation methodology and results.
This report provides information and tools for policymakers, regulators, utilities, shared renewable energy developers, program administrators and others to support the adoption and implementation of shared renewables programs specifically designed to provide tangible benefits to low income and moderate income individuals and households.
Home energy management systems (HEMS) continue to present a unique opportunity and challenge. While energy savings have been documented for many HEMS, some of the most promising opportunities from these devices and systems can be found in the internet of things (IoT) and smart home technologies. This report presents market updates, a regional goal, and strategies to drive market transformation and achieve the many benefits from HEMS and the Smart Energy Home.
NEEP has been tracking the residential lighting market for several years and has provided analysis in many reports. As the transformation of this complex market gains traction, we find the conversation and need for new information narrowing to one key topic: LEDs. While CFLs continue to play a role in residences and amongst Northeast and Mid-Atlantic program administrators, the LED has transitioned into the starring role of the residential lighting show.
This report represents NEEP’s annual assessment of the major policy developments of 2014, as well as its look into the immediate future, where NEEP gauge states’ progress toward capturing cost-effective energy efficiency as a first-order resource. While looking at the region as a whole, NEEP also provides summary and analysis of some of the biggest building energy efficiency successes and setbacks from Maine to Maryland — including significant energy efficiency legislation and regulations and changes in funding levels for energy efficiency programs.
This Guide is designed to help state and local policymakers to take full advantage of new policy developments by providing them with a comprehensive set of tools to support launching or accelerating residential energy efficiency programs. The Guide focuses on four categories of policies that have proven particularly effective in providing a framework within which residential energy efficiency programs can thrive: incentives and financing, making the value of energy efficiency visible in the real estate market, data access and standardization, and supporting utility system procurement of energy efficiency.
The Guide to Action provides in-depth information about over a dozen policies and programs that states are using to meet their energy, environmental, and economic objectives with energy efficiency, renewable energy, and combined heat and power. Each policy description is based on states’ experiences in designing and implementing policies, as documented in existing literature and shared through peer-exchange opportunities provided to states by EPA’s State Climate and Energy Program.
Energy efficiency collaboratives vary greatly and are typically designed for a specific jurisdiction, making them hard to compare side by side. This guide seeks to highlight a few common elements and draw conclusions on the overall effectiveness of specific characteristics of collaboratives. This guide defines and examines four different types of collaboratives in terms of their origin, scope, decision-making method, membership, duration, available resources, and how they interact with and influence their respective commissions.
This guide was developed for local climate and clean energy (i.e., energy efficiency, renewable energy, and combined heat and power) program implementers to help create or transition to program designs that are viable over the long term. The guide draws on the experience and examples of EPA’s Climate Showcase Communities as they developed innovative models for programs that could be financially viable over the long term and replicated in other communities.
This report lays the groundwork for a dialogue to explore regulatory and policy mechanisms for ensuring that efficiency financing initiatives provide value for society and protection for consumers. Through case studies of Connecticut, New York, Massachusetts, California, and Maryland, it explores emerging issues that jurisdictions will need to tackle when considering an increased reliance on financing.
The New York State Energy Research and Development Authority (NYSERDA) developed this manual for use by contractors participating in their New York Home Performance with ENERGY STAR (HPwES) program. The manual is intended to help contractors understand and navigate the HPwES program. It provides important information about HPwES program rules, opportunities, incentives, and forms. The manual is an example of a comprehensive contractor handbook in which programs will find many useful examples of forms, procedures, and other resources.
This guide identifies 12 best practices for policymakers, regulators, and program administrators to help building owners invest to increase the energy efficiency of multifamily affordable housing.
A number of states are beginning to recognize Demand Reduction Induced Price Effects (DRIPE) as a real, quantifiable benefit of energy efficiency and demand response programs. DRIPE is a measurement of the value of demand reductions in terms of the decrease in wholesale energy prices, resulting in lower total expenditures on electricity or natural gas across a given grid. This paper reviews the existing knowledge and experience from select U.S. states regarding DRIPE (including New York and Ohio), and the potential for expanded application of the concept of DRIPE by regulators.
Among the many benefits ascribed to energy efficiency is the fact that it can help create jobs. Although this is often used to motivate investments in efficiency programs, verifying job creation benefits is more complicated than it might seem at first. This paper identifies some of the issues that contribute to a lack of consistency in attempts to verify efficiency-related job creation. It then proposes an analytically rigorous and tractable framework for program evaluators to use in future assessments.
There are more than 17 million multifamily households nationwide, yet they remain a significant and mostly untapped opportunity for energy efficiency gains. Many cities and states that have embraced energy retrofitting as a job creator and boon to both the environment and economy have yet to address potential savings in multifamily properties, primarily because of obstacles not faced by single family and commercial properties. This paper discusses two barriers -- a lack of information and financing -- that stand in the way of multifamily energy retrofits.
This report provides an overview of the current state of on-bill programs and provides actionable insights on key program design considerations for on-bill lending programs.
Over the past 30 years, program administrators have concentrated on investment behavior change -- that is getting their customers to install things like insulation and lighting systems using various behavior change tools such as marketing, education, rebates, and technical assistance to support the investment behavior change. Today, as program administrators move to expand the range of behavior change strategies in their portfolios, it is often difficult to know where to begin. The New York State Energy Research and Development Authority (NYSERDA) began by detailing the range of behavior change strategies and identifying strategic opportunities.
This report from the New York State Energy Research and Development Authority (NYSERDA) details the range of behavior change strategies in the existing portfolio and identifies strategic opportunities in the area of behavior change.
This report provides information on how access to energy use data can help local governments create policies for benchmarking and disclosing building energy performance for public and private sector buildings.
Many states have adopted policies intended to overcome the barriers that limit the more efficient use of electricity. Yet because such efforts have not addressed the lack of consumer information and motivation to improve efficiency, many opportunities for energy efficiency remain untapped. To help address that problem, states, utilities, and other energy efficiency service providers have begun to develop new approaches to informing and motivating customers based on behavioral economics and psychology research. This report describes three broad strategies that states can use to engage consumers' participation in energy efficiency programs: provide direct consumer information and feedback on energy use, influence social norms; and match messages and messengers to target audiences. Recommendations for actions that governors can take within the context of each of those three strategies are provided.
This report from Climate Solutions analyzes small- to medium-sized American cities that are using successful methods to further clean energy economic development. Better Buildings Neighborhood Program partners that are featured in the report include Bainbridge Island and Bremerton, Washington; Boulder, Colorado; Bedford, New York; Madison, Wisconsin; and Grand Rapids, Michigan. The report includes details on the how the featured cities funded their projects, found successful models to reach their goals, and to see which new projects are off to a promising start.
This report profiles the early results of a diverse range of small- to medium-sized American cities with different economic and energy profiles that are pioneering the clean energy economy. Many communities used federal grants to jumpstart long-term strategies to test and refine various clean energy and energy efficiency solutions. Others developed innovative financing strategies in the absence of grant money. These city-led efforts to catalyze local clean energy economic development are important to watch as federal grants sunset, especially in the absence of a comprehensive national energy or climate policy.
This report provides state and local policymakers with information on successful approaches to the design and implementation of residential efficiency programs for households ineligible for low-income programs.
This report identifies issues associated with developing a national evaluation, measurement, and verification (EM&V) standard for end-use, non-transportation, energy efficiency activities.
This report provides an overview of residential customer information and behavior efficiency programs, and identifies key challenges to and solutions for increasing the penetration of these programs nationwide.
This report presents the results of a scoping study to assess the need for national databases that can support best practices in energy efficiency program evaluation, measurement, and verification (EM&V).
This report helps policymakers understand how electric and natural gas utilities can achieve greater efficiency by establishing numeric energy savings targets and goals for energy efficiency programs.
This report summarizes existing research and discusses current practices, opportunities, and barriers to coordinating energy efficiency and demand response programs.
This report presents best practices for operating successful portfolio-level efficiency programs, including assessing efficiency potential, cost-effectiveness screening, and developing a portfolio of approaches.
This report provides an overview of evaluation, measurement, and verification approaches used to estimate the load impacts and effectiveness of energy efficiency programs.
This report highlights road-tested strategies, resources, and tools states can use to adopt cost-effective energy efficiency and clean energy programs for their buildings, facilities, and operations.
This report summarizes the issues and approaches involved in motivating customers to reduce the total energy they consume through energy prices and rate design.
This report summarizes the scale and economic value of energy efficiency for reducing carbon emissions and discusses barriers to achieving the potential for cost-effective energy efficiency.
This report provides guidance on determining the efficiency potential in a utility footprint, state, or region; evaluating efficiency as a supply-side resource; and developing detailed efficiency program plans.
This report describes the key issues, best practices, and main process steps for integrating energy efficiency into resource planning on an equal basis with other resources.
The Center for Energy Efficiency and Building Science (CEEBS), a division of the Workforce Development Institute at Hudson Valley Community College, delivers energy efficiency and building science courses. The courses are designed to prepare students for the Building Performance Institute (BPI) certification examinations and are an excellent choice for contractors and remodelers.